Cnc Machining Center Is A Highly Automated Multifunctional Cnc Machine Tool With Tool Magazine And Automatic Tool Changer. After The Workpiece Is Clamped On The Machining Center Once, The Digital Control System Can Control The Machine Tool To Automatically Select And Replace The Tools According To Different Procedures, And Automatically Change The Spindle Speed, Feed, And The Motion Trajectory Of The Tool Relative To The Workpiece And Other Auxiliary Functions. Greatly Improve The Production Efficiency Of Cnc Prototypes.

Vertical Machining Center:

It Refers To A Machining Center With The Spindle Axis And The Worktable Perpendicular To It. It Is Mainly Suitable For Processing Complex Parts Such As Plates, Plates, Molds And Small Shells. The Vertical Machining Center Can Complete Processes Such As Milling, Boring, Drilling, Tapping And Cutting Threads. The Vertical Machining Center Is At Least Three-axis And Two-linkage, And Generally Can Achieve Three-axis And Three-linkage. Some Can Carry Out Five-axis Or Six-axis Control.

Features Of Vertical Machining Center:

The Height Of The Column Of The Vertical Machining Center Is Limited, And The Processing Range Of Box-like Workpieces Should Be Reduced. This Is The Shortcoming Of The Vertical Machining Center. However, The Vertical Machining Center Is Easy To Clamp And Locate The Workpiece; The Cutting Tool Movement Track Is Easy To Observe, The Debugging Program Is Convenient To Check And Measure, And The Problem Can Be Found In Time, And The Shutdown Processing Or Modification Can Be Performed; The Cooling Condition Is Easy To Establish, And The Cutting Fluid Can Directly Reach The Tool And The Processing Surface; The Three Coordinate Axes Are Consistent With The Cartesian Coordinate System, And The Intuitive Feel Is Consistent With The Viewing Angle Of The Drawing. The Chips Are Easy To Remove And Fall To Avoid Scratching The Processed Surface. Compared With The Corresponding Horizontal Machining Center, The Structure Is Simple, The Floor Space Is Smaller, And The Price Is Lower.

2. What Problems Will The Vertical Machining Center Encounter?
1. Overcutting Of The Workpiece
The External Cause Of Overcutting Of The Workpiece Is Often Insufficient Tool Strength Or Improper Size, While The Internal Cause May Be Irregular Operation, Improper Cutting Parameter Setting, Uneven Cutting Allowance Setting, Which Leads To Too Large Tolerances, Which Ultimately Results In The Workpiece Over-cutting Has Produced Machining Errors.
2. Inaccurate Score
Centering Is The Step Of The Machining Center To Determine The Origin. It Can Be Said That The Centering Step Is Inseparable For Any Operation Using The Machining Center. In Addition To Inaccurate Manual Operation By The Operator, Burrs Around The Mold, Non-vertical Sides, And Magnetism On The Centering Rod Will Cause Inaccurate Centering.
3. Collision
Although Machine Collision Is Now Inevitable, A Qualified Operator Of A Machining Center Should Have The Ability To Control Avoidable Machine Collision Factors Within The Range Of Avoidance. There Are Various Phenomena That Cause Collisions, And Avoidable Factors Must Be Controlled In Advance.

In General, Vertical Machining Centers Often Have Various Problems In Actual Processing And Production. We Need To Summarize The Common Problems Of Vertical Machining Centers In Practice, And Find Effective Ways To Improve, So As To Improve Processing Efficiency And Ensure Processing Quality.